ADMT-150S-X has two configurations
A–ADMT-150S-X Standard configuration Type-1 Parts List
- mainframe(Touch Screen) X1
- Electrode X2
- 10m measurement cable X1
- charger X1
- Data export line x1
- Aluminum box X1
- Warranty card X1
B–ADMT-150S-X With Wireless sensor Optional configuration Type-2 Parts List
- mainframe(Touch Screen) X1
- Electrode X2
- 10m measurement cable X1
- charger X1
- Data export line
- Aluminum box X1
- Warranty card X1
- Additional Wireless sensor X1
ADMT-150S-X Optional configuration Type-2
ADMT-200S has two configurations
A–ADMT-200S Standard configuration Type-1 Parts List
- mainframe(Touch Screen) X1
- Electrode X2
- 20m measurement cable X1
- charger X1
- Data export line x1
- Aluminum box X1
- Warranty card X1
B–ADMT-200S With Wireless sensor Optional configuration Type-2 Parts List
- mainframe(Touch Screen) X1
- Electrode X2
- 20m measurement cable X1
- charger X1
- Data export line
- Aluminum box X1
- Warranty card X1
- Additional Wireless sensor X1
ADMT-200S Optional configuration Type-2
How to work: detailed text introduction and video introduction
1-Connect the electrode and 20m measuring line (the standard measuring line length of 150M water detector is 10m)
The ADMT-200S measure cable is 20m long, and the ADMT-150S-X measure cable is 10m long. The standard length can be adjusted according to the size of the site. The shortest developed length cannot be less than 5m
2-After determining the first measuring point, start measuring more measuring points until the measurement of the whole profile is completed
- The measuring point is located in the middle of 20m. If the measuring point is located in the middle of 10m measuring cable, it is very important to determine the position of the measuring point
- After the first measurement point is determined, when moving to the next position, each subsequent move needs to maintain the equal distance move
- At least 6 measuring points need to be measured for a complete profile
3-Different measuring tools can be used to complete the measurement work
- The above is the standard configuration, which requires Pull the cable measurement and at least 2 people to complete the measurement
- If the site is very small or hard cement ground or rock is encountered, wireless probe can be used to complete the measurement. This is the advantage of wireless sensor probe. Generally, we recommend customers to consider adding it, because it is optional, and we can consider adding it when necessary
4-The detector has the function of freely selecting the detection depth, which is more flexible to select the detection depth you need
| Model | ADMT-150S-X | ADMT-200S |
| Adjustable Depth | 50M, 100M, 150M | 100M, 150M, 200M |
| Display Result | 2D/3D | 2D/3D |
5-After the measurement results are obtained, they will be directly sent to the engineer for analysis
- You can directly send the screenshots or photos to the engineers for analysis
- Until you can analyze independently, engineers can no longer analyze for you, but as long as you need free analysis
6-How to work it Video Tutorials?
7-ADMT-150S-X ADMT-200S 2-year warranty and free lifetime technical service support
Technical service support can be contacted via Wechat QR Code or Whatsapp QR Code, or you can call us at Tel:+86-13227326207
