ADMT-800HT3 borehole water detector
- Adjustable detection depth：100m/200m/300m/500m/800m
- mainframe probe integrated, MN and probe switched (C3), length 100cm
- Use Android mobile phone Bluetooth connection
| Model | ADMT-800HT3 |
|---|---|
| Weight | 7.75kg |
| Dimension | 113x18x22CM |
| Length | 100CM |
| Color | yellow |
| Max Detector Depth | 800M |
| Measurement mode | MN(Electrodes), TT(Sensor) |
Details About ADMT-800HT3 borehole water detector
ADMT-800HT3 uses advanced electromagnetic induction technology to detect water, which makes it highly accurate and reliable.The working principle of this technology is to change the electromagnetic field and then interact with the conductive water layer to generate a signal, which can be interpreted by the equipment to determine the location and depth of water resources.
In addition to advanced technology, ADMT-800HT3 is also highly portable and easy to use.
Convenient to carry and operate, it is very suitable for use in remote and rugged environments.
It can also be used without network connection through mobile phone Bluetooth, and can provide clear and detailed information about detected water resources for display on mobile phone
Similar products at different depth of 800 meter High Accuracy Ground Water Detector:
| parameter model | ADMT-800HT2 | ADMT-800HT3 | ADMT-3000HT3 |
| Adjustable depth(m) | 100/200/300/500/800 | 100/200/300/500/800 | 100-3000 |
| Battery power consumption | 8.4V2600mAH lithium battery, power consumption about 130mA | ||
| Connection mode | Bluetooth 4.0 (or Wifi) | ||
| MN electrode | Copper 12mm φ 10 or self-made electrode | ||
| Operation display | (5-10.1) inch Android touch screen (self configured or optional) WIFI or 4G network | ||
| major function | Optional depth, 2D/3D automatic drawing, full wireless, automatic parameter adaptation | ||
| TT electromagnetic induction coil（mm/w） | 300/4 | 450/8 | 450/12 |
| TT electromagnetic induction core（KmH/m） | 100 | 120 | 200 |
| work environment | Soft/Hard | ||
| Frequency range (HZ) | 0.01—8K | ||
| Measurement mode | MN/TT | ||
| resolution ratio | 0.01mV±2% | 0.01mV±1% | |
| Sampling time (seconds) | 40-200 | 40-350 | |
| Deep delamination | 10-80 | ||
| Length Weight cm/kg | 86/2.9 | 100/3.5 | 100/4 |
Shanghai Weiqi Equipment Technology Co., Ltd. focuses on the field of geophysical prospecting, and has always been customer service-oriented, solving various geophysical exploration problems of customers, providing work efficiency and more intelligent work exploration
Its biggest feature is that one person can complete the measurement work, the detection depth can be freely set from 100m to 800m below ground for detection, and there are two measurement modes.
①: connect electrode measurement, select MN mode, stable insertion into the ground for data acquisition and measurement
②: even in challenging geological conditions can also be measured normally, especially hard concrete ground or rocky areas can work normally, you can choose TT mode measurement
