Before measuring you need to check that all your accessories are complete, it contains the following accessories

• ①Mainframe Screen(10 inch touch screen)
• ②Copper Electrode(16 piece)
• ③Connecting Cable(40m)
• ④Battery Charger(1 piece)
• ⑤Data export line(1 piece)
• ⑥ Strap(1 piece)
• ⑦Winding clip(1 piece)
• ⑧Ｈammer(1 piece)
• ⑨Aluminum Box(1 piece)
• ⑩Manual

The following is a 16D channel groundwater detector multi-channel detailed configuration details photos:

The detailed operation steps are as follows:

1-Distribute the electrodes equidistantly and insert them into the ground using a hammer

The maximum distance between each electrode is 2.5m, you can set the distance according to your actual environment, the electrodes only need to ensure that the ground will not fall over, the depth of insertion will not affect the measurement data

2-After the electrodes are distributed, the electrodes are connected to the measuring Cable

Up to 16 electrodes can be connected, if you want to measure fewer points you can reduce the electrodes accordingly, 16 electrodes measure 14 points, if you want to measure 13 points, reduce 2 electrodes accordingly, and so on.

3-Connecting the measurement cable to the Mainframe

When connected, you need to align the small red dot on the top of the measuring line connector with the small red dot on the top of the mainframe, and dock the red dot to the red dot for insertion, it can work normally

4-Select the New Measurement button on the mainframe to start the measurement

• A–Before measurement, the connection mode needs to choose serial connection, can not choose Bluetooth or WIFI connection mode, multi-channel devices need to choose serial connection

• B–The first time you log in, you need to connect to the network. After you log in successfully, you don’t need the network anymore, and you can work normally in the field without being affected by the lack of network.
• C–Enter the measurement interface can choose different depth for measurement, ADMT-300SX-16D maximum detection depth is 300m, you can set 100m, 200m, 300m, for different depth measurement options

5-Multi-channel can also add wireless sensor probe, wireless sensor probe is optional

The location marked in the figure is the wireless probe, this is optional, you can add or not add, you can also consider adding it later

Wireless Sensor probes have three main advantages：

• One person can do all the measurement work
• Can be adapted to work on hard ground or concrete
• Can also measure work in a small space, can move the updated spacing to ensure smooth measurement work

6-You can also choose to view a video to better understand the entire measurement process

Due to the continuous upgrading of the product, all the accessories will be slightly changed, the operation process of the video will not change, all the complete accessories are subject to delivery, you can also confirm with us before delivery

7-All ADMT series products are supported by a 2-year warranty and free lifetime technical service support

Technical service support can be contacted via Wechat QR Code or Whatsapp QR Code, or you can call us at Tel:+86-13227326207